TB分離式扭力扳手06002D可換頭扳手美國MOUNTZ蒙士
TB分離式扭力扳手06002D可換頭扳手美國MOUNTZ蒙士
- Torque ranges from 25 ozf.in to 50 lbf.in.
- The break-over mechanism minimizes shock to assemblies.
- Tamper-proof internal adjustment. No external adjustment scale - must be preset using a torque analyzer.
- "Breaks-over" when preset torque is reached eliminating overtorquing.
- Six different colored aluminum handles allow for color-coding of specific torque values in production areas.
- Small and lightweight. Ideal for use in restricted spaces.
- Handle: 5" Length x 9/16" Diameter.
The versatile TB wrench is oftened used for RF, COAX and SMA connector applications. The SMA wrench improves the control of the fastening process by reducing the risk of a connector from being under and overtightened. The correct tightening of a RF, COAX and SMA Connectors used in RF cabling applications is essential to ensure optimum performance. This is particularly important in high frequency applications using stainless steel or beryllium-copper bodies.
To configure the TB fixed head wrench, select Handle part number below and select interchangeable head part number. Example: 06004C-156.
| | | | | |
| | | | | |
| 06001A | 25 - 50 ozf.in | | 06001B | 3 - 12 lbf.in | | 06001C | 12 - 21 lbf.in | | 06001D | 20 - 50 lbf.in | | | | 06002A | 25 - 50 ozf.in | | 06002B | 3 - 12 lbf.in | | 06002C | 12 - 21 lbf.in | | 06002D | 20 - 50 lbf.in | | | | 06003A | 25 - 50 ozf.in | | 06003B | 3 - 12 lbf.in | | 06003C | 12 - 21 lbf.in | | 06003D | 20 - 50 lbf.in | |
| | | | | |
| | | | | |
| 06004A | 25 - 50 ozf.in | | 06004B | 3 - 12 lbf.in | | 06004C | 12 - 21 lbf.in | | 06004D | 20 - 50 lbf.in | | | | 06005A | 25 - 50 ozf.in | | 06005B | 3 - 12 lbf.in | | 06005C | 12 - 21 lbf.in | | 06005D | 20 - 50 lbf.in | | | | 06006A | 25 - 50 ozf.in | | 06006B | 3 - 12 lbf.in | | 06006C | 12 - 21 lbf.in | | 06006D | 20 - 50 lbf.in | |
| | Note! Torque is easily adjusted by removing the cap and turning the adjustment screw with the 3/16" Hex Key. Then verify torque output using a torque analyzer. |
| | | | TB models are design to have one permanent head style attached to it. When the TB torque wrench achieves torque, the head breaks-over preventing the operator from overtorquing the fastener. |
所有評(píng)論僅代表網(wǎng)友意見，與本站立場無關(guān)。