詳情介紹：
輸出型扭力扳手MTBN200-SW*美國MOUNTZ蒙士
- The torque wrenches are fitted with a Universal Rotary Switch Module (360 rotating connector prevents twisting or kinking of the cable), which signals when a pre-set torque value is reached.
- Signal Output Wrenches can be connected to a Signal Delay Unit(accessory item) to monitor the use of the wrenches as the electrical signal is displayed each time the wrench achieves its pre-set torque value.
- Micro-switch contained in internal shock-resistant housing.
- Possible use in Production Line Control: Allowing only components with correctly torque fasteners to pass through a work station. This could be a simple matter of actuating a gate switch or signaling a computer controlled work station.
- Counting Function: Count the number of times the torque has been applied - check against finished goods.
- Possible Uses
- Production Line Control: Allowing only components with correctly torque fasteners to pass through a work station. This could be a simple matter of actuating a gate switch or signaling computer controlled work station.
- Counting Function: Count the number of times the torque has been applied – check against finished goods
| |
TSP (Cam-Over Signal Output Wrench)
| Model | Item # | lbf.in | N.m | kgf.cm | Sq. Dr | Wt. oz. | Wt. kg |
| TSP5/45-SW | 020720 | 10 - 45 | 1 - 5 | 10.2 - 51 | 1/4" | 18.7 | 240 |
| TSP10/90-SW | 020721 | 20 - 90 | 2 - 10 | 20.4 - 102 | 1/4" | 18.7 | 240 |
TSN (Cam-Over Signal Output Wrench)
| Model | Item # | lbf.ft | N.m | kgf.m | Sq. Dr | Wt. oz. | Wt. kg. |
| TSN25D-SW | 020275 | 2 - 18 | 3 - 25 | 0.3 - 2.5 | 1/4" | 24 | 0.68 |
| TSN25A-SW | 020261 | 2 - 18 | 3 - 25 | 0.3 - 2.5 | 3/8" | 24 | 0.68 |
| TSN55-SW | 020259 | 10 - 40 | 15 - 55 | 1.5 - 5.6 | 3/8" | 40.2 | 1.14 |
| TSN125-SW | 020266 | 30 - 90 | 40 - 125 | 4 - 12.7 | 1/2" | 60 | 1.7 |
MTBN (Break-Over Signal Output Wrench)
| Model | Item # | lbf.in | N.m | kgf.cm | Drive Type | Wt. oz. | Wt. kg | Break |
| MTBN2-SW | 020319 | 1.8 - 18 | 0.2 - 2 | 2 - 20 | Captive Pin | 15.8 | 0.45 | 20° or 90° |
| MTBN10-SW | 020327 | 9 - 89 | 1 - 10 | 10 - 102 | Captive Pin | 16.5 | 0.65 | 20° or 90° |
| MTBN25-SW* | 020492 | 44 - 221 | 5 - 25 | 51 - 255 | 16mm Spigot | 26.5 | 0.75 | 20° |
| MTBN65-SW* | 020633 | 89 - 575 | 10 - 65 | 102 - 663 | 16mm Spigot | 38.5 | 1.09 | 20° |
| MTBN135-SW* | 020634 | 177 - 1194 | 20 - 135 | 204 - 1377 | 16mm Spigot | 59.2 | 1.68 | 20° |
| MTBN200-SW* | 020719 | 354 - 1770 | 40 - 200 | 408 - 2039 | 16mm Spigot | 61.4 | 1.74 | 20° |
* MTBN 25, 65, 135 & 200 operate in single direction (clockwise)
| Note! Each wrench includes universal rotary switch and straight cable. | Dimensions |
| |
| Accessory Optional - Cable |
| Model: Spiral Cable Item # 20-D94406 |
| Replacement Parts Each Signal Output wrench includes a straight cable and universal rotary switch module. If you need to replace an item, order these part numbers. |
| Model: Universal Rotary Switch module Item # 20-B25900 |
| Model: Straight Cable Item #20-D94402 |
所有評(píng)論僅代表網(wǎng)友意見，與本站立場無關(guān)。