詳情介紹：
美國MOUNTZ蒙士預置扭矩限制器PTL 40i-Q
美國MOUNTZ蒙士預置扭矩限制器PTL 40i-Q
- Various models that range from 1 to 85 lbf.in.
- Designed to be used “in-line" to limit torque for hａnd (static) applications. For low torque applications.
- Can also be used as an overload protection device on most applications where measuring a static overload is needed.
- The rotary clucth mechanism ‘slips free’ when the pre-set torque value is reached, eliminating overtightening. The mechanism then automatically resets.
- Pre-set using a torque analyzer.
- Bi-directional operation and are calibrated in either the CW or CCW direction.
- Lighweight and easy-to-use.
- Non-length dependent. Bi-directional operation and are calibrated in either the CW or CCW direction.
Torque Ranges
| Model | Item # | lbf.in | cN.m | Input | Output | Length | Weight |
| PTL5i | 280060 | 1 - 5 | 11.3 - 56.5 | 3/8" F/Sq | 1/4" F/Hex | 3" | 3.3 oz |
| PTL 40i | 280061 | 4.5 - 40 | 50.9 - 452 | 3/8" F/Sq | 1/4" F/Hex | 3" | 3.3 oz |
| PTL 5i-Q | 280062 | 1 - 5 | 11.3 - 56.5 | 3/8" F/Sq | 3/8" M/Sq | 3" | 3.3 oz |
| PTL 40i-Q | 280063 | 4.5 - 40 | 50.9 - 452 | 3/8" F/Sq | 3/8" M/Sq | 3" | 3.3 oz |
| PTL 85i-Q | 280064 | 45 - 85 | 508.5 - 960.5 | 3/8" F/Sq | 3/8" M/Sq | 3" | 3.3 oz |
|
| WARNING! Do not use with a power tool. |
所有評論僅代表網友意見，與本站立場無關。