美國MOUNTZ蒙士扭矩傳感器BLRTSX177i-RA (170269)
美國MOUNTZ蒙士扭矩傳感器BLRTSX177i-RA (170269)
- Non-contact signal transfer and maintenance free.
- The brushless rotary torque & angle sensor is a compact design & bi-directional.
- Used in-line with rotating shafts or nutrunners for feed back control. Motor testings, high RPM Tools or rotational measurement applications.
- RA Models:
- Angle output 2-channel quadrature
- 360 pulses per rotation
- Ability to measure the rotation angle of a fastener
- Joint rate & breakaway torque can be measured too - Features ARCII technology, an instant auto-recognition system of the BLRTSX connected to the PTT or LTT.
- Accuracy ± .2% of full scale*.
Note: Note: * This is the stａnd alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer (PTT or LTT).
Torque Ranges
| Model | Item # | American | S.I. | Input Drive | Output Drive |
| BLRTSX177i-RA | 170269 | 25 - 140 ozf.in | 18 - 98.8 cN.m | Shaft | Shaft |
| BLRTSX177i-RAA | 170261 | 25 - 140 ozf.in | 18 - 98.8 cN.m | Shaft | Shaft |
| BLRTSX18i-R | 170262 | 2 - 18 lbf.in | 22.5 - 203 cN.m | Shaft | Shaft |
| BLRTSX18i-RA | 170263 | 2 - 18 lbf.in | 22.5 - 203 cN.m | Shaft | Shaft |
| BLRTSX44i-R | 170264 | 4 - 44 lbf.in | 45.2 - 497 cN.m | Shaft | Shaft |
| BLRTSX44i-RA | 170265 | 4 - 44 lbf.in | 45.2 - 497 cN.m | Shaft | Shaft |
| BLRTSX89i-R | 170266 | 10 - 89 lbf.in | 113 -1005 cN.m | Shaft | Shaft |
| BLRTSX89i-RA | 170267 | 10 - 89 lbf.in | 113 -1005 cN.m | Shaft | Shaft |
| BLRTSX177i-R | 170268 | 18 - 177 lbf.in | 203.4 - 2000 cN.m | * | * |
| BLRTSX177i-RA | 170269 | 18 - 177 lbf.in | 203.4 - 2000 cN.m | * | * |
| BLRTSX36F-R | 170270 | 4 - 36 lbf.ft | 5 - 50 N.m | * | * |
| BLRTSX36F-RA | 170271 | 4 - 36 lbf.ft | 5 - 50 N.m | * | * |
| BLRTSX73F-RA | 170272 | 8 - 73 lbf.ft | 10 - 100 N.m | * | * |
| BLRTSX148F-RA | 170273 | 15 - 148 lbf.ft | 20 - 200N.m | * | * |
| BLRTSX368F-RA | 170274 | 37 - 368 lbf.ft | 50 - 500 N.m | * | * |
| BLRTSX738F-RA | 170275 | 74 - 738 lbf.ft | 100 - 1000 N.m | * | * |
R models are Torque only transducers.
RA models are Torque & Angle tranducers.
* With feather keyways (2x180 degree)
| Certified: Supplied with NIST-Traceable Certification of Calibration |
| Dimensions |
| BLRTSX-R Pin Connection A = Ground (Shunt Calibration) | BLRTSX-RA Pin Connection A = Ground (Shunt Calibration) |
| Note! For optimum performance, it is recommended to utilize coupling in order to minimize extraneous load & moments due to misalignment. Contact customer service for information. |
美國MOUNTZ蒙士扭矩傳感器BLRTSX177i-RA (170269)
美國MOUNTZ蒙士扭矩傳感器BLRTSX177i-RA (170269)
美國MOUNTZ蒙士扭矩傳感器BLRTSX177i-RA (170269)
所有評論僅代表網(wǎng)友意見，與本站立場無關(guān)。