詳情介紹：
美國MOUNTZ蒙士扭矩傳感器SDX50i(078001)
美國MOUNTZ蒙士扭矩傳感器SDX50i(078001)
- Torque Sensors for auditing or tightening fasteners to a specified torque when mated with a torque analyzer.
- Ergonomic rubber grip and stainless steel Female/Hex bit holder.
- Features “ARC II" technology, an instant auto-recognition system of the SDX connected to the FTA-100, LTT or PTT.
- Connect to a torque analyzer to monitor, test or audit a fastener.
- Safe Overload: 125% of Rated Output.
- Length x Width ( 6" x 1 1/2")
- Weight 0.5 lbs
- Accuracy ± .25% of full scale*.
Note: * This is the stａnd alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer (FTA-100, PTT or LTT).
| Model | Item # | American | S.I. | Drive Size |
| SDX10i | 078001 | 1 - 10 lbf.in | 11.3 - 113 cN.m | 1/4 F/Hex |
| SDX50i | 078001 | 5 - 50 lbf.in | 56.5 - 565 cN.m | 1/4 F/Hex |
| Certified: Supplied with NIST-Traceable Certification of Calibration |
|
| SDX Pin Connection A = Signal (+) B = Signal (-) C = Excitation (-) D = Excitation (+) E/F = N/A |
美國MOUNTZ蒙士扭矩傳感器SDX50i(078001)
美國MOUNTZ蒙士扭矩傳感器SDX50i(078001)
美國MOUNTZ蒙士扭矩傳感器SDX50i(078001)
所有評(píng)論僅代表網(wǎng)友意見，與本站立場(chǎng)無關(guān)。