氣缸內置，驅動力通過斜楔機構傳遞。工作穩定可靠。在加工期間，卡盤通過雙作用單向閥保持壓力。只有在主軸停止時，壓縮空氣才能通過配氣盤和配氣圈供給。
Chuck with built-in cylinder, driving force is transmitted through the wedge mechanism. It is stable and reliable in work. Built in double non-return valves maintain the air pressure during machining. The compressed air feed via distributor ring and profile seals only when the spindle completely stops.
配氣盤的安裝和定心調整通過固定于主軸箱端面的配氣盤支架實現，保證與旋轉的卡盤不存在任何接觸。
The stationary distributor ring must be mounted so that no contact exist against the rotating power chuck. The distributor ring is centered and laterally mounted by means of a bracket fixed to the headstock of the lathe.
用于直管或彎管的端頭加工，可以自定心夾緊直管，當管端彎曲時與可伸縮尾座上的定心卡盤配合采用卡爪浮動夾緊。僅適用外圓夾緊。
End machining straight or bent tubes. Tube can be self-centering clamped or with radial jaw compensation at bent tubes by means of a retractable centering chuck fixed on the tailstock. The chuck only used for external clamping.
| 型號/規格 MODEL/SIZE | A | B | C | DH6 | E | F | G | G1 | H | H1 | J | K | L | M | N (Inch) | O | P | |
| KFW53 -RF | 570-200 | 575 | 200 | 575 | 415 | 520 | 490 | M12 | 25 | 264 | 256 | 8 | 560 | 20 | 6×M8 | Rc3/8 | 41 | 30 |
| 605-250 | 605 | 250 | 620 | 450 | 570 | 540 | M12 | 25 | 264 | 256 | 8 | 605 | 20 | 6×M8 | Rc3/8 | 41 | 30 | |
| 650-275 | 650 | 275 | 650 | 480 | 595 | 565 | M12 | 25 | 264 | 256 | 8 | 635 | 20 | 6×M8 | Rc3/8 | 41 | 30 | |
| 700-325 | 710 | 325 | 710 | 530 | 655 | 620 | M16 | 25 | 264 | 256 | 8 | 695 | 20 | 6×M8 | Rc1/2 | 41 | 30 | |
| 型號/規格 MODEL/SIZE | a | b | c | d | e | f (Min/Max) | g | h (Min/Max) | α° | β° | |
| KFW53 -RF | 570-200 | 60 | 25.5 | 3/32×90º | M20 | 16 | 38/168 | 200 | 84.5/100.5 | 15º | 12×30º |
| 605-250 | 60 | 25.5 | 3/32×90º | M20 | 16 | 38/158 | 190 | 109/125 | 15º | 12×30º | |
| 650-275 | 60 | 25.5 | 3/32×90º | M20 | 16 | 38/168 | 200 | 122/138 | 15º | 12×30º | |
| 700-325 | 70 | 25.5 | 3/32×90º | M20 | 16 | 38/170 | 202 | 147/163 | 15º | 12×30º | |
| 型號/規格 MODEL/SIZE | 通孔直徑 (mm) Thru-Hole Diameter | 卡爪行程 (直徑) (mm) JAW STROKE | 卡爪浮動量（mm） Compensating Stroke | 工作壓力(bar) (較小/較大) Operaring Pressure (Bar) (Mix/Max) | 活塞面積（cm2） Pision Area | 夾緊力-使用壓力 6bar(KN) Clamping Force- Operating Pressure at 6bar | 較高轉速（r.p.m） Max.Speed | |
| KFW53 -RF | 570-200 | 200 | 16 | ±4 | 3/10 | 1311 | 120 | 900 |
| 605-250 | 250 | 16 | ±4 | 3/10 | 1502 | 150 | 800 | |
| 650-275 | 275 | 16 | ±4 | 3/10 | 1597 | 180 | 700 | |
| 700-325 | 325 | 16 | ±4 | 3/10 | 1788 | 200 | 600 | |
所有評論僅代表網友意見，與本站立場無關。